Omron OS32C Laser Scanner

Compact Safety laser Scanner

World’s most: compact size (104.5 mm height),

power efficient (5 W) and light weight (1.3 kg)

• 70 sets of safety zone and warning zone combinations, for complex

changes in zone guarding parameters

• Configuration memory block, no need to reprogram after sensor

replacement, minimal down time

• 8 Individual Sector Indicators and LED indicators, determine scanner

status at a glance

• Easy-to-use Software Tool simplifies creation of complex zone

combinations

• Ethernet capable, for management over network

• Range: up to 3 m for safety zone and 10 m for warning zones

• Response time as fast as 80 ms

• Reference Boundary Monitoring function, prevents unauthorized

changes in the scanner position

• Type 3 Safety Laser Scanner complies with IEC61496-1/-3

• Performance Level d and category 3 (ISO13849-1)

Specifications:

Sensor Type: Type 3 Safety Laser Scanner

Safety Category: Category 3, Performance Level d (ISO13849-1: 2006)

Detection Capability Non-transparent with a diameter of 70 mm (1.8% reflectivity or greater)

Monitoring Zone Monitoring Zone Set Count: (Safety Zone + 2 Warning Zones) x 70 sets

Operating Range Safety zone radius up to 3 m; Warning zone radius up to 10 m

Maximum Measurement Error 100 mm *1

Detection Angle 270°

Angular Resolution 0.4°

Laser Beam Diameter 6 mm at optics cover, 14 mm at 3 m.

Response Time Response time from ON to OFF: From 80 ms (2 scans) to 680 ms (up to 17 scans)

Response time from OFF to ON: Response time from ON to OFF + 100 ms to 60 s (configurable)

Zone Switching Time 20 to 320 ms

Line Voltage 24 VDC +25%/-30% (ripple p-p 2.5 V max.) *2

Power Consumption Normal operation: 5 W max., 4 W typical (without output load) *3

Standby mode: 3.75 W (without output load)

Emission Source (Wavelength) Infrared Laser Diode (905 nm)

Laser Protection Class: Class 1: IEC/EN60825-1 (2007)

Class 1: JIS6802 (2005)

Class I: CFR21 1040.10, 1040.11

Safety Output (OSSD) PNP transistor x 2, load current of 250mA max., residual voltage of 2 V max.,

load capacity of 2.2 μf max., leak current of 1 mA max. *3, *4, *5

Auxiliary Output (Non-Safety) NPN/PNP transistor x 1, load current of 100 mA max., residual voltage of 2 V max., leak current of 1 mA max. *4, *5, *7

Warning Output (Non-Safety) NPN/PNP transistor x 1, load current of 100 mA max., residual voltage of 2 V max., leak current of 1 mA max. *4, *5, *7

Output Operation Mode Auto Start, Start Interlock, Start/Restart Interlock

Input

External Device

Monitoring (EDM)

ON: 0 V short (input current of 50 mA), OFF: Open

Start ON: 0 V short (input current of 20 mA), OFF: Open

Zone Select ON: 24 V short (input current of 5 mA), OFF: Open

Stand-by ON: 24 V short (input current of 5 mA), OFF: Open

Connection Type Power Cable: 18-pin mini-connector (pigtail)

Communication Cable: M12, 4-pin connector

Connection with PC *6 Communications: Ethernet

OS Supported: Windows 2000, Windows XP, or Windows Vista

Indicators RUN indicator: Green, STOP indicator: Red, Interlock Indicator: Yellow, Warning Output Indicator: Orange,

Status/Diagnostic Display: 2 x 7-segment LEDs, Intrusion Indicators: Red LED x 8

Protective Circuit Protection against output load short and reverse power connection

Ambient Temperature Operation: -10 to 50°C, Storage: -25 to 70°C

Ambient Humidity Operation & Storage: 95% RH max., non-condensing

Ambient Operation Illumination Incandescent lamp: Illumination on receiving surface 1500 lx max. (an angle of laser scanning plane and disturbance

light must be ±5 degrees or more)

Enclosure Rating IP65 (IEC60529)

Enclosure Sensor head: Die-cast aluminum, optical cover: Polycarbonate, I/O block: Die-cast aluminum

Dimensions (WxHxD) 133.0 x 104.5 x 142.7 mm (except cable)

Dielectric Withstand Voltage 350 VAC, 50/60 Hz, 1 minute

Insulation Resistance 20 mega-ohm or higher (500 VDC)

Impact Resistance 98 m/s2 1,000 times for each of X, Y, and Z directions (IEC 60068-2-29)

Vibration 10 to 55 Hz double-amplitude of 0.7 mm, 20 sweepings for X, Y, and Z directions (IEC60068-2-6)

Weight (Main Unit only) 1.3 kg

Power Cable Up to 30 m

Communication Cable Up to 100 m for 100 BASE-T Cat 5 cable

Accessories CD-ROM (User’s Manual and Configuration Tool)

Approvals EN61496-1 (Type 3 ESPE), EN61496-3 (Type 3 AOPDDR), EN61508 (SIL2),

IEC61496-1 (Type 3 ESPE), IEC61496-3 (Type 3 AOPDDR), IEC61508 (SIL2),

UL508, UL1998, CAN/CSA-C22.2 No. 14, -CAN/CSA-C22.2 No. 0.8